Heavy Duty Acidic CIP Detergent Descaler
RXSOL-68-6830-025Specially formulated to dissolve and remove difficult inorganic scale deposits, mineral fouling, rust, salts and other contaminants without requiring equipment dismantling.
Product Description
Heavy Duty Acidic CIP Detergent Descaler
Heavy Duty Acidic CIP Detergent Descaler is a high-performance, concentrated acidic cleaning chemical designed for Cleaning-In-Place (CIP) operations in marine, offshore and industrial water-borne systems. It is specially formulated to dissolve and remove difficult inorganic scale deposits, mineral fouling, rust, salts and other contaminants without requiring equipment dismantling.
The product is suitable for use in heat exchangers, water pipelines, water heaters, boilers, tanks, cooling systems and air heaters. Controlled circulation through a CIP system helps provide uniform cleaning and reduces equipment downtime. (Marine Chemicals)
Heavy Duty Acidic CIP Detergent Descaler Scale Offshore is a highly concentrated acidic cleaning agent engineered for efficient removal of mineral scale and deposits while remaining mild to personnel, equipment, and the environment. It is classified as PLONOR (Poses Little or No Risk to the environment), making it suitable for use in environmentally sensitive offshore and marine applications. The product contains RXSOL active agents, a 100% natural, health- and environmentally optimized substrate, delivering powerful cleaning performance with a reduced ecological footprint. Its biodegradable formulation supports safer handling, minimizes environmental impact, and aligns with modern sustainability and regulatory requirements.
Application & Usage
- All types of heat exchangers
- Water pipe systems
- Water heaters
- Cooling rolls
- Tanks
- Boilers
- Air heaters.
Dosage
Deposits Removed
The formulation is intended for cleaning a variety of difficult deposits, including:
Limescale • Carbonates • Rust • Metal Oxides • Salts • Cement Deposits • Humus • Shellfish/Marine Fouling
Recommended CIP Cleaning
For offshore CIP applications, the product information recommends dilution with water and controlled circulation. One published product direction specifies 1 part descaler to 5 parts water, with a recommended cleaning temperature of approximately 60°C; severe fouling may require adjustment of concentration or temperature under controlled conditions. (RxSol Group)
DIRECTIONS FOR USE- Stir or shake the product before use.
- Dilute 1 part Offshore Scale Descaler with 5 parts of water.
- Recommended cleaning temperature: 60°C.
- For very severe fouling, increase the concentration or increase the temperature.
This offshore scale CIP cleaner is a high-performance chemical formulation designed for effective Cleaning-In-Place of water-borne systems. It rapidly dissolves limescale, carbonates, rust, salts, and marine fouling without the need for equipment dismantling. The product is optimized for controlled circulation and temperature, ensuring uniform and safe cleaning. It restores heat transfer efficiency, reduces downtime, and extends equipment service life in offshore environments.
Industrial Area
Heavy Duty Acidic CIP Detergent Descaler
Heavy Duty Acidic CIP Detergent Descaler is a high-performance, concentrated acidic cleaning chemical designed for Cleaning-In-Place (CIP) operations in marine, offshore and industrial water-borne systems. It is specially formulated to dissolve and remove difficult inorganic scale deposits, mineral fouling, rust, salts and other contaminants without requiring equipment dismantling.
The product is suitable for use in heat exchangers, water pipelines, water heaters, boilers, tanks, cooling systems and air heaters. Controlled circulation through a CIP system helps provide uniform cleaning and reduces equipment downtime. (Marine Chemicals)
Key Features
-
Heavy-duty acidic descaling action
-
Effective against inorganic mineral scale
-
Removes limescale and carbonate deposits
-
Helps remove rust and metal oxides
-
Effective against salt and marine deposits
-
Suitable for CIP circulation cleaning
-
Designed for offshore and marine applications
-
Helps restore heat-transfer efficiency
-
Reduces the need for mechanical cleaning and dismantling
-
Suitable for controlled-temperature CIP operations
Typical Applications
Heavy Duty Acidic CIP Detergent Descaler can be used for cleaning:
-
Plate and shell-and-tube heat exchangers
-
Water circulation pipelines
-
Boilers and water heaters
-
Cooling systems
-
Cooling rolls
-
Offshore water systems
-
Storage and process tanks
-
Air heaters
-
Other water-borne process equipment (Marine Chemicals)
Deposits Removed
The formulation is intended for cleaning a variety of difficult deposits, including:
Limescale • Carbonates • Rust • Metal Oxides • Salts • Cement Deposits • Humus • Shellfish/Marine Fouling
Recommended CIP Cleaning
For offshore CIP applications, the product information recommends dilution with water and controlled circulation. One published product direction specifies 1 part descaler to 5 parts water, with a recommended cleaning temperature of approximately 60°C; severe fouling may require adjustment of concentration or temperature under controlled conditions. (RxSol Group)
Before application, always verify the equipment manufacturer's recommendations, chemical compatibility and the applicable product technical bulletin/SDS.
Material Compatibility
The product information indicates compatibility with commonly encountered materials such as steel, copper, paint, ceramic/china and rubber. However, low-pH acidic cleaners can affect sensitive materials such as zinc, galvanized steel, black iron and marble. A small-area compatibility test is recommended before full-scale cleaning, particularly where dissimilar metals are connected. (Marine Chemicals)
Technical Information
Product: Heavy Duty Acidic CIP Detergent Descaler
Generic Name: CIP Offshore Scale Remover
Product Code: RXSOL-68-6830-025
Appearance: Clear liquid
pH: Approximately 1–2
Solubility: Highly miscible
Density: >1.2
Pack Size: 25 Ltr. (Marine Chemicals)
Why Use an Acidic CIP Descaler?
Regular scale accumulation can reduce heat-transfer efficiency, restrict water circulation and increase energy consumption. CIP descaling provides a practical way to clean internal surfaces without dismantling equipment, helping reduce maintenance time and operational downtime.
Heavy Duty Acidic CIP Detergent Descaler is therefore suitable for marine, offshore, industrial water-treatment and process-equipment maintenance applications where controlled chemical circulation is preferred.
Safety
This is an acidic chemical and should be handled according to its current SDS and technical instructions. Appropriate chemical-resistant gloves, eye/face protection and suitable protective clothing should be used. Do not mix acidic CIP cleaners with bleach, chlorinated products, ammonia or incompatible alkaline chemicals. (RxMarine)
“Heavy Duty Acidic CIP Detergent Descaler Supplier in UAE, Oman and India.”
Technical Specifications
Technical Information
Product: Heavy Duty Acidic CIP Detergent Descaler
Generic Name: CIP Offshore Scale Remover
Product Code: RXSOL-68-6830-025
Appearance: Clear liquid
Solubility: Highly miscible
Pack Size: 25 Ltr. (Marine Chemicals)
| Parameters | Value |
|---|---|
| Appearance | Clear, Liquid |
| Odor | Charateristic |
| pH | 1-2 |
| Solubility | Highly miscible |
| Density | >1.2 |
Some key features of RXSOL Offshore Descaler
- Optimized for CIP operations in offshore and marine systems
- Effective against scale, rust, salts, and biological fouling
- Safe on common metals, rubber seals, and coatings
- Reduces downtime and improves system efficiency
Remarks / Precautions
Why Use an Acidic CIP Descaler?
Regular scale accumulation can reduce heat-transfer efficiency, restrict water circulation and increase energy consumption. CIP descaling provides a practical way to clean internal surfaces without dismantling equipment, helping reduce maintenance time and operational downtime.
Heavy Duty Acidic CIP Detergent Descaler is therefore suitable for marine, offshore, industrial water-treatment and process-equipment maintenance applications where controlled chemical circulation is preferred.
Safety
This is an acidic chemical and should be handled according to its current SDS and technical instructions. Appropriate chemical-resistant gloves, eye/face protection and suitable protective clothing should be used. Do not mix acidic CIP cleaners with bleach, chlorinated products, ammonia or incompatible alkaline chemicals. (RxMarine)
Heavy Duty Acidic CIP Detergent Descaler, Acidic CIP Cleaner, Offshore Scale Remover, CIP Descaler, Marine Descaling Chemical, Heat Exchanger Descaler, Boiler Descaler, Offshore CIP Chemical, Scale Removal Chemical, Marine CIP Cleaning Chemical.
EFFECT ON MATERIALProcedure
Deposits Removed
The formulation is intended for cleaning a variety of difficult deposits, including:
Limescale • Carbonates • Rust • Metal Oxides • Salts • Cement Deposits • Humus • Shellfish/Marine Fouling
Recommended CIP Cleaning
For offshore CIP applications, the product information recommends dilution with water and controlled circulation. One published product direction specifies 1 part descaler to 5 parts water, with a recommended cleaning temperature of approximately 60°C; severe fouling may require adjustment of concentration or temperature under controlled conditions. (RxSol Group)
DIRECTIONS FOR USE- Stir or shake the product before use.
- Dilute 1 part Offshore Scale Descaler with 5 parts of water.
- Recommended cleaning temperature: 60°C.
- For very severe fouling, increase the concentration or increase the temperature.
This offshore scale CIP cleaner is a high-performance chemical formulation designed for effective Cleaning-In-Place of water-borne systems. It rapidly dissolves limescale, carbonates, rust, salts, and marine fouling without the need for equipment dismantling. The product is optimized for controlled circulation and temperature, ensuring uniform and safe cleaning. It restores heat transfer efficiency, reduces downtime, and extends equipment service life in offshore environments.
Tag Identification
- Limescale and carbonate deposits caused by calcium and magnesium salts
- Rust and metal oxides resulting from corrosion
- Salts and mineral scaling from seawater evaporation
- Organic fouling such as humus and biological matter
- Marine growth and shellfish accumulation in intake and cooling systems
- Restores heat transfer efficiency in heat exchangers and heaters
- Reduces energy consumption and operating costs
- Prevents unplanned shutdowns and equipment damage
- Extends equipment life and reduces maintenance frequency
- Eliminates the need for dismantling, saving time and labor
- Plate, shell-and-tube, and spiral heat exchangers
- Water piping and circulation systems
- Boilers and water heaters
- Cooling rolls and air heaters
- Storage tanks and process vessels
- Pre-flush to remove loose debris
- Circulation of chemical cleaning solution at a recommended dilution ratio
- Controlled temperature and flow rate, often around 60°C for optimal reaction
- Monitoring pH and deposit removal
- Final rinse and neutralization, ensuring the system is ready for operation
- High efficiency against carbonates, oxides, and biological fouling
- Compatibility with offshore materials and elastomers
- Controlled reaction rates to prevent aggressive corrosion
- Environmental compliance and ease of handling
- Proven performance in offshore and marine conditions
Notes
Key Features
-
Heavy-duty acidic descaling action
-
Effective against inorganic mineral scale
-
Removes limescale and carbonate deposits
-
Helps remove rust and metal oxides
-
Effective against salt and marine deposits
-
Suitable for CIP circulation cleaning
-
Designed for offshore and marine applications
-
Helps restore heat-transfer efficiency
-
Reduces the need for mechanical cleaning and dismantling
-
Suitable for controlled-temperature CIP operations
Typical Applications
Heavy Duty Acidic CIP Detergent Descaler can be used for cleaning:
-
Plate and shell-and-tube heat exchangers
-
Water circulation pipelines
-
Boilers and water heaters
-
Cooling systems
-
Cooling rolls
-
Offshore water systems
-
Storage and process tanks
-
Air heaters
-
Other water-borne process equipment (Marine Chemicals)
Deposits Removed
The formulation is intended for cleaning a variety of difficult deposits, including:
Limescale • Carbonates • Rust • Metal Oxides • Salts • Cement Deposits • Humus • Shellfish/Marine Fouling
Recommended CIP Cleaning
For offshore CIP applications, the product information recommends dilution with water and controlled circulation. One published product direction specifies 1 part descaler to 5 parts water, with a recommended cleaning temperature of approximately 60°C; severe fouling may require adjustment of concentration or temperature under controlled conditions. (RxSol Group)
Before application, always verify the equipment manufacturer's recommendations, chemical compatibility and the applicable product technical bulletin/SDS.
Other Names
BIO GEN ACTIVE 131 OFFSHORE SCALE CIP REAGENT, Acid Detergent Descaler, Acid Guard S 25 Ltr
Material Safety Data Sheet (MSDS)
| Product Name | Heavy Duty Acidic CIP Detergent Descaler |
| Part Number | RXSOL-68-6830-025 |
Company Details:
RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA
Branch : Kandla, Mumbai , Chennai, Vizag, Kolkata, UAE , OMAN , CANADA and KENYA
| Phone | +91 22 20871200 - 1400 |
| Fax | +91 22 27612100 :::AOH :0091 9821214367 |
| mail @ rxmarine.com | |
| Website | www.rxmraine.com |
| Component | Concentration (%) | CAS Number |
| Nitric Acid | 20-30% | 7697-37-2 |
| Phosphoric Acid | 5-10% | 7664-38-2 |
| Mixture of Organic Acids | 5-15% | Proprietary |
| Phosphonic Acids Blend | 5-10% | Proprietory |
| Surface Active Agents for enhanced cleaning | 1-2% | Proprietory |
| Corrosion Inhibitor | 2-5% | Proprietory |
This is a proprietory mixture product with no other hazardous ingredients.
| Signal Word | Warning |
| Hazard Statements |
H319 Causes serious eye irritation
H335 May cause respiratory irritation
|
| Precautionary Statements |
Precautionary statements - prevention
P261 Avoid breathing dust/fume/gas/mist/vapours/spray
P280 Wear eye protection/face protection
Precautionary statements - response
P304+P340 IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing
P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact
lenses, if present and easy to do. Continue rinsing
P312 Call a POISON CENTER or doctor/physician if you feel unwell
Precautionary statements - storage
P403+P233 Store in a well-ventilated place. Keep container tightly closed
|
| Supplemental Hazard Statements | None |
| Other hazards |
Results of PBT and vPvB assessment
This mixture does not contain any substances that are assessed to be a PBT or a vPvB.
|
| General notes | Take off contaminated clothing. |
| Following inhalation | Provide fresh air. In all cases of doubt, or when symptoms persist, seek medical advice. |
| Following skin contact | Rinse skin with water/shower. In all cases of doubt, or when symptoms persist, seek medical advice. |
| Following eye contact | Rinse skin with water/shower. In all cases of doubt, or when symptoms persist, seek medical advice. |
| Following ingestion | Rinse mouth. Call a doctor if you feel unwell. |
| Most important symptoms and effects, both acute and delayed | Irritation, Cough, Dyspnoea |
| Indication of any immediate medical attention and special treatment needed | None |
| Suitable extinguishing media |
Co-ordinate firefighting measures to the fire surroundings
water spray, alcohol resistant foam, dry extinguishing powder, BC-powder, carbon dioxide (CO₂)
|
| Unsuitable extinguishing media | Water jet |
| Special hazards arising from the substance or mixture | Ingredients of the mixture combustible. The product itself does not burn. |
| Hazardous combustion products | Carbon monoxide (CO), Carbon dioxide (CO₂) |
| Advice for firefighters | In case of fire and/or explosion do not breathe fumes. Fight fire with normal precautions from a reasonable distance. Wear self-contained breathing apparatus. |
Personal precautions, protective equipment and emergency procedures
| For non-emergency personnel |
Avoid contact with skin, eyes and clothes. Do not breathe vapour/spray.
|
| Environmental precautions | Keep away from drains, surface and ground water. The product is an acid. Before discharge into sewage plants the product normally needs to be neutralised. |
| Methods and material for containment and cleaning up | |
| Advice on how to contain a spill | Absorb with liquid-binding material (sand, diatomaceous earth, acid or universal binding agents). |
| Other information relating to spills and releases | Place in appropriate containers for disposal. |
| Reference to other sections | Hazardous combustion products: see section 5. Personal protective equipment: see section 8. Incompatible materials: see section 10. Disposal considerations: see section 13. |
| Precautions for safe handling | Provision of sufficient ventilation. |
| Advice on general occupational hygiene | Wash hands before breaks and after work. Keep away from food, drink and animal feedingstuffs. |
| Conditions for safe storage, including any incompatibilities |
Keep container tightly closed.
|
| Incompatible substances or mixtures | Observe hints for combined storage |
| Consideration of other advice: | |
| Specific designs for storage rooms or vessels | Recommended storage temperature: 15 – 25 °C |
| Specific end use(s) | No information available. |
| Eye/face protection | Use safety goggle with side protection. |
| Skin protection |
Hand protection
Wear suitable gloves. Chemical protection gloves are suitable, which are tested according to EN 374.
For special purposes, it is recommended to check the resistance to chemicals of the protective gloves mentioned above together with the supplier of these gloves. The times are approximate values from
measurements at 22 ° C and permanent contact. Increased temperatures due to heated substances, body heat etc. and a reduction of the effective layer thickness by stretching can lead to a considerable reduction of the breakthrough time. If in doubt, contact manufacturer. At an approx. 1.5 times larger / smaller layer thickness, the respective breakthrough time is doubled / halved. The data apply only to the pure substance. When transferred to substance mixtures, they may only be considered as a guide.
Type of material
NBR (Nitrile rubber)
Material thickness
0,11 mm
Breakthrough times of the glove material
480 minutes (permeation: level 6)
Other protection measures
Take recovery periods for skin regeneration. Preventive skin protection (barrier creams/ointments) is recommended.
|
| Respiratory protection |
Respiratory protection necessary at: Aerosol or mist formation. Type: ABEK (combined filters against gases and vapours, colour code: Brown/Grey/Yellow/Green).
|
| Environmental exposure controls | Keep away from drains, surface and ground water. |
| Physical state | Liquid |
| Color | Colorless |
| Odor | Odorless |
| Melting point/freezing point | Not determined |
| Boiling point or initial boiling point and boiling range | ~100 °C at 1,013 hPa |
| Flammability | Non-combustible |
| Lower and upper explosion limit | Not determined |
| Flash point | Not determined |
| Autoignition temperature | Not determined |
| Decomposition temperature | Not relevent |
| pH (value) | 1 - 2 (20 °C) |
| Kinematic viscosity | Not determined |
| Water solubility | Miscible in any proportion |
| Partition coefficient n-octanol/water (log value) | This information is not available |
| Vapour pressure | 23 hPa at 20 °C |
| Density | 1.24 g /cm³ at 20 °C |
| Relative vapor density | Information on this property is not available |
| Particle characteristics | Not relevant (liquid) |
| Oxidising properties | None |
| Other information | |
| Information with regard to physical hazard classes |
Hazard classes acc. to GHS
(physical hazards): not relevant
|
| Other safety characteristics | |
| Miscibility | Completely miscible with water |
| Reactivity | This material is not reactive under normal ambient conditions. |
| Chemical stability | The material is stable under normal ambient and anticipated storage and handling conditions of temperature and pressure. |
| Possibility of hazardous reactions | Violent reaction with: strong oxidiser, Reducing agents, Metals, Bases |
| Conditions to avoid | There are no specific conditions known which have to be avoided. |
| Incompatible materials | Different metals |
| Hazardous decomposition products | Hazardous combustion products: see section 5. |
| Information on toxicological effects |
Test data are not available for the complete mixture.
|
| Classification procedure | The method for classification of the mixture is based on ingredients of the mixture (additivity formula). |
| Acute toxicity | Shall not be classified as acutely toxic. |
| Skin corrosion/irritation | Shall not be classified as corrosive/irritant to skin |
| Serious eye damage/eye irritation | Causes serious eye irritation. |
| Respiratory or skin sensitisation | Shall not be classified as a respiratory or skin sensitiser. |
| Germ cell mutagenicity | Shall not be classified as germ cell mutagenic |
| Carcinogenicity | Shall not be classified as carcinogenic. |
| Reproductive toxicity | Shall not be classified as a reproductive toxicant |
| Specific target organ toxicity - single exposure | May cause respiratory irritation. |
| Specific target organ toxicity - repeated exposure | Shall not be classified as a specific target organ toxicant (repeated exposure). |
| Aspiration hazard | Shall not be classified as presenting an aspiration hazard. |
| If swallowed |
Data are not available.
|
| If in eyes | Causes serious eye irritation |
| If inhaled | Irritation to respiratory tract, cough, Dyspnoea |
| If on skin | irritant effects, pruritis, localised redness |
| Other information | None |
| Endocrine disrupting properties | None of the ingredients are listed. |
| Toxicity | Shall not be classified as hazardous to the aquatic environment. |
| Biodegradation | Data are not available. |
| Bioaccumulative potential | Data are not available. |
| Mobility in soil | Data are not available. |
| Results of PBT and vPvB assessment | Data are not available. |
| Endocrine disrupting properties | Data are not available. |
| Other adverse effects | Data are not available. |
| Waste Treatment Methods | This material and its container must be disposed of as hazardous waste. Dispose of contents/container in accordance with local/regional/national/international regulations. |
| Sewage disposal-relevant information | Do not empty into drains. |
| Remarks | Waste shall be separated into the categories that can be handled separately by the local or national waste management facilities. Please consider the relevant national or regional provisions. |
| UN number | Not subject to transport regulations |
| UN proper shipping name | Not assigned |
| Transport hazard class(es) | Not assigned |
| Packaging group | Not assigned |
| Environmental hazards | Non-environmentally hazardous acc. to the dangerous goods regulations |
| Special precautions for user | There is no additional information. |
| Transport in bulk according to IMO instruments | The cargo is not intended to be carried in bulk. |
| Information for each of the UN Model Regulations | |
| Transport informationNational regulationsAdditional information(UN RTDG) | Not subject to transport regulations. UN RTDG |
| International Maritime Dangerous Goods Code (IMDG) - Additional information | Not subject to IMDG. |
| International Civil Aviation Organization (ICAO-IATA/DGR) - Additional information | Not subject to ICAO-IATA. |
| Safety, health and environmental regulations/legislation specific for the substance or mixture | There is no additional information. |
| Australian Inventory of Chemical Substances(AICS) | All ingredients are listed or exempt from listing. |
| Other information | Directive 94/33/EC on the protection of young people at work. Observe employment restrictions under the Maternity Protection Directive (92/85/EEC) for expectant or nursing mothers. |
| Chemical Safety Assessment | Chemical safety assessments for substances in this mixture were not carried out. |
| Other Information |
The information above is believed to be accurate and represents the best information currently available to us. However, we make no warranty of merchantability or any other warranty, express or implied, with respect to such information, and weassume no liability resulting from its use. Users should make their own investigations to determine the suitability of the information for their particular purposes. In no event shall be liable for any claims, losses, or damages of any third party or for lost profits or any special, indirect, incidental, consequential or exemplary damages, howsoever arising, even if Rx Marine International has been advised of the possibility of such damages. DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable. |
Supply Locations
Heavy Duty Acidic CIP Detergent Descaler, Acidic CIP Cleaner, Offshore Scale Remover, CIP Descaler, Marine Descaling Chemical, Heat Exchanger Descaler, Boiler Descaler, Offshore CIP Chemical, Scale Removal Chemical, Marine CIP Cleaning Chemical manufacturer and supplier in Mumbai, Kandla, Kolkata, Chennai, Vizag, Paradip, Haldia, Surat, Barka, Muscat, Sohar, Oman, FUjairah, Dubai, Sharjah, Ajman, Abudhabi, UAE
Need pricing or a bulk quote?
Send us the product and quantity — our Gandhidham team replies with a quote the same day.