MembraneGuard MG 11 Silt Remover

Primary tabs

Free shipping on all orders over 100000 INR.

No votes yet

SKU::RXSOL-33-1523-025

Product Qty Per Unit:

25.00

Product usage unit:

Kg.PWD

Negotiate Price

Product Delivery Locations:

Kandla, Gandhidham, Mundra, Sikka, Jamnagar, Surat, Navlakhi, Porbander, Pipava, Dehej, Hazira, Okha, Vadodra, Ahmedabad, Rajkot

Category:

RO Chemicals-33

Generic Name:

RO Membrane Silt Cleaner

Remove organics, silt and other particulate deposits from polyamide, polysulfone and thin film composite membrane surfaces

Product Description:

The high pH formulation MembraneGuard MG 11 Silt Remover was created especially to remove silt, organics, and other particle deposits from polyamide. Thin film composite membrane with polysulfone surfaces. This cutting-edge, extremely potent powder has the subsequent characteristics:

pH was set at 10.0 + 0.5.
Extremely efficient at room temperature
Is easily washed and has no surfactants
Contains chelating agents and detergent builders or pH buffer

Product Application:

All polyamide, polysulfone, and thin-film composite membranes can be used with MembraneGuard MG 11 Silt Remover. It can be used at any temperature up to the highest that the membrane manufacturer recommends, starting at 15°C (60°F). Twenty-five grams of MembraneGuard MG 11 Silt Remover are diluted with one liter of water as the standard.

Product Procedure:

Dosage: 25 gm per ltr of water

How to use MembraneGuard MG 11 Silt Remover:

Add RO permeate to the cleaning tank.
Add 25 grams of Floclean MC11 gradually for every liter of available cleaning tank space.
The cleaning solution can be heated to increase cleaning efficacy.
Use a mixer to thoroughly mix the solution or run it through the cleaning pump.
Adhere to the temperature restrictions set by the membrane manufacturer.
For one hour, follow the flow rate suggested by the membrane or system manufacturer and circulate the solution through the membrane bank in the feed direction.

The following recommendations may be followed in the event that the manufacturer's advice is unavailable.

Product Note:

Spiral Wound Membrane

Membrane Diameter in inches	Flow rate in ltrs/min
4	23
6	53
8	91
10	114
12	204

Hollow Fiber Membrane

Membrane Diameter in inches	Flow rate in ltrs/min
4	19
8	57
10	76

Membrane Diameter in inches

Flow rate in ltrs/min

To avoid the removed solids from redepositing, the first return flow—up to 15% of the cleaning tank volume—should be routed to the drain in cases of severe fouling. For multi-pass systems, cleaning each pass independently will get the greatest results. If the removed material causes the solution to become turbid or discolored, it should be thrown out. Before cleaning more passes, a new solution needs to be made. Before putting the system back in service, rinse it with permeate.

Product Technical Specification:

Product pack size:

Product alias:

<p> RO Module Cleaner, MC-11, Floclean MC 11</p>

RO Membrane Silt Cleaner manufacturer INDIA,RO Membrane Silt Cleaner manufacturer UAE, RO Membrane Silt Cleaner manufacturer OMAN

RXSOL Brand is popular as a water treatment chemicals Company in India, UAE, Oman, Nairobi, and Sudan. Some of our water treatment chemicals RAW MATERIALS product list.

1	Cyclohexylamine	CHA	108-91-8
2	Morpholine	MORPH	110-91-8
3	3-Methoxypropylamine	MOPA	5332-73-0
4	N,N-Diethylhydroxylamine	DEHA	3710-84-7
5	Hydrazine Hydrate	HH	10217-52-4
6	Carbonyl Dihydrazine	CBDH	497-18-7
7	Acetone Oxime	DMKO	127-06-0
8	EDTA-2Na	EDTA-2Na	6381-92-6
9	EDTA-4Na	EDTA-4Na	10378-23-1
10	2,2-Dibromo-2-Cyanoacetamide	DBNPA	10222-01-2
11	Benzalkonium Chloride	BAC	63449-41-2
12	Polyhexamethylene Guanidine	PHMG	57028-96-3
13	Sodium Bromide	NaBr	7647-15-6
14	Polyacrylamide	PAM	9003-5-8
15	Sodium Molybdate	SUMO	7631-95-0
16	Sodium Tripolyphosphate	STPP	7758-29-4

Water Treatment Chemicals supplier in your city nearby you in your COUNTRY INDIA, OMAN, UAE, NAIROBI

Remarks:

Primary tabs