Primary tabs
BIOCIDE - BIOSPERSE
SKU::RXSOL-40-4092-025
Biosperse biocide for control of bacteria, fungi and algae in industrial water systems such as recirculating water systems, pasteurizers, air washer systems, membrane separation systems, coatings, emulsion polymers and adhesives. Biosperse 250 provides long lasting killing effects and is recommended in systems with a pH between 6-9,5. Biosperse 250 is easily detoxified so it can be applied even in environmentally sensitive areas.
Biocide Biosperse is a powerful microbiocide which will control a wide range of troublesome microbes in both open and closed water systems.
Is a broad-spectrum biocide, which very effectively controls spore and non-spore forming bacteria, SRB’s, Fe-bacteria, algae and fungi. Provides a long lasting killing effect, which enables less frequent biocide additions.
| Appearance : | clear, light green liquid |
| pH : | 3.5 |
| Density (kg/m3) : | 1030 |
| Solubility : | completely miscible in water |
| Flash Point : | none |
These data are to be seen as typical values and should not be considered as specifications.
BIOCIDE - BIOSPERSE manufacturer supplier distributor in Mumbai, Kandla, Kolkata, Vizag, Chennai, India, Fujairah, Dubai UAE, Muscat Oman, Kenya Africa. Get the best quality of BIOCIDE - BIOSPERSE at a competitive price from us. We have ready stock of BIOCIDE - BIOSPERSE in India, UAE Gulf, Oman, Kenya Africa. Contact us for bulk as well as small orders.
Biosperse biocide for control of bacteria, fungi and algae in industrial water systems such as recirculating water systems, pasteurizers, air washer systems, membrane separation systems, coatings, emulsion polymers and adhesives. Biosperse 250 provides long lasting killing effects and is recommended in systems with a pH between 6-9,5. Biosperse 250 is easily detoxified so it can be applied even in environmentally sensitive areas.
Features
Is a broad-spectrum biocide, which very effectively controls spore and non-spore forming bacteria, SRB’s, Fe-bacteria, algae and fungi. Provides a long lasting killing effect, which enables less frequent biocide additions.
| Appearance : | clear, light green liquid |
| pH : | 3.5 |
| Density (kg/m3) : | 1030 |
| Solubility : | completely miscible in water |
| Flash Point : | none |
These data are to be seen as typical values and should not be considered as specifications.
Feeding
The quantity of Biosperse required for any given application will depend on such factors as the type and volume of the system, the extent of microbiological contamination and the degree of control required. Biosperse 250 may be fed directly from the drum or diluted with water and fed by any suitable chemical feed system. Biosperse should be dosed directly into the sump or basin or any location where good distribution can be assured.
Handling Precautions
Wear suitable protective gloves and safety goggles. In case of contact immediately flush with water. After eye contact seek medical advice. If swallowed, drink large quantities of milk, egg whites or a gelatine solution. If these are not available, drink large quantities of water. Do not induce vomiting. Seek medical advice immediately. Small spills can be flushed with water. Large spills should be collected for disposal. Use Biosperse safely. Always read label and product information (M.S.D.S.) before use.
Packaging
This product is available in a variety of packaging sizes.
Important Information
Typical Properties: Refer to the Material Safety Data Sheet (MSDS).
Regulatory Information
Refer to the MSDS or contact your sales representative for any additional regulatory and environmental information.
Safety
Use the health and safety information contained in the MSDS to develop appropriate product handling procedures to protect your employees and customers.
