Primary tabs

FREE SHIPPINGFree shipping on all orders over 100000 INR.

Biological Guard Antifouling

0
No votes yet
SKU::RXSOL-40-4003-025

Product Qty Per Unit: 
25.00
Product usage unit: 
Ltr.

Negotiate Price

Product Delivery Locations: 
Kandla, Gandhidham, Mundra, Sikka, Jamnagar, Surat, Navlakhi, Porbander, Pipava, Dehej, Hazira, Okha, Vadodra, Ahmedabad, Rajkot
Generic Name: 
Marine Growth Remover
Anti fungal based dispersing cleaner for the control of fouling by marine growth such as algae, shellfish, mussels, barnacles and micro-organisms and fungal growth in the sea water side of coolings systems. Due to its molecular firm foaming properties, it
Product Description: 

RXSOL-40-4003-025 Fouling Preventing Liquid is a very effective clear, yellowish green with anti fungal based dispersing cleaner for the control of fouling by marine growth such as algae, shellfish, mussels, barnacles and micro-organisms and fungal growth in the sea water side of coolings systems. Due to its moleculer firm foaming properties, it also acts as a corrosion inhibitor.  
COMMON NAME : BIOLOGICAL GUARD

Product Application: 

It should be preferably be started on a clean system since it is formulated to prevent growth rather than remove existing growth of microorganism < bacteria , fungi , larvae etc.. ( EXISTING GROWTH  CAN BE CLEAN BY USING RXSOL-11-1008--DC / RXSOL-54-1008-SA  ) 

The best POINT of feeding is as early as possible in the system , preferably at the suction point of strainer , this will helps dispersion of solution in all parts of the sewater cooling system.

 

# Effectively control  MICROORGANISM GROWTH
# Economical , reduce down time cost , also doesn't require  any special monitoring
# Also control biological corrosion

 

Product Procedure: 

For sea water cooling systems

Dose 150 – 500 ML of  RXSOL-40-4003-025   for every 100 tons of sea water flowing through the system per hour. The treatment should be applied daily when the vessel is on coastal waters. Normally  the treatment is not required when sailing deep sea .

For  ballast tanks
Dose 1 litre of RXSOL-40-4003-025 per 10 tons of water prior to ballasting, followed by a monthly dose of 2 litres per 100 tons.

For Trim Tanks, Oil Rig Sea Legs and Similar Systems

Dose 25 litres of RXSOL-40-4003-025 per 100 tons of water  . GENERAL Testing for bacteria can be done with our RXSOL DIP SLIDE METHODS ( Designed to check and see anytime anywhere invisible danger Bacteria / fungus grow from Cooling / Drinking water ) which indicate the extent of the bacteriological contamination.

Product Note: 

1 . Avoid to use in any food area / food crop ( FARMING PURPOSE ).
2 . It is strongly recommended to clean entire fouled contaminated system prior to its use . 
3.  IT SHOULD ONLY BE DILUTED WITH FRESH WATER .
4. Causes
eye and skin irritation , WORKERS must wear all chemical resistant apron and face mask , long pants , shoes. Strictly avoid contamination  of food items.

Product Technical Specification: 

Product pack size: 

Product alias: 
<p> Amersperse 280, Antifouling Care Treat Seawater Chemical, Eazy MMBD, Drewsperse SWD, Microbiological Control Agent, Drewsperse 794, Bio guard plus or NALCO 73551, Bioguard 25 Ltr</p>

#BioAntifoulingGuardMarineGrowthController_Supplier
#BioAntifoulingGuardMarineGrowthController_Manufacturer
#BioAntifoulingGuardMarineGrowthController_India
#BioAntifoulingGuardMarineGrowthController_Dubai
#BioAntifoulingGuardMarineGrowthController_Muscat

Bio Antifouling Guard marine growth controller for COOLING WATER TREATEMENT chemical manufacturer and supplier in Mumbai, Kandla, Gandhidham, Mundra, Surat Hazira, Chennai Ennore, Visakhapatnam Gangavara, Kakinada, Kolkata, Haldia Paradip, Ajman, Abudhabi, Dubai, Sharjah, Fujairah, UAE, Ruwi Gala Barka, Muscat Oman, Nairobi, Yemen, Sudan, Kenya, Canada

Articles: 
Remarks: