WestIndia chemicals is one of the most promising manufacturers & suppliers of Coolant Premix Redcool in Kandla, Gandhidham, Mundra, Sikka, Jamnagar, Surat, Navla, in India , Singapore & UAE
WestIndia chemicals is one of the most promising manufacturers & suppliers of Coolant Premix Redcool RXSOL-40-4043-025 in Kandla, Gandhidham, Mundra, Sikka, Jamnagar, Surat, Navlakhi, Porbander, Pipava, Dehej, Hazira, Okha, Vadodra, Ahmedabad, Rajkot in India , Gulf , Singapore and Also UAE
RXSOL REDCOOL is an ALL YEAR ROUND automotive cooling system treatment, designed to provide complete cooling system protection.Modern engine cooling systems are designed with the fluid characteristics of glycol based coolants in mind. RXSOL REDCOOL is a complete full fill requirement and it’s ready to use - simply pour.
RXSOL REDCOOL is a glycol premix coolant which reduces cavitation in areas such as the water pump and surface cavitation in hot spots of the cylinder head. The minimisation of cavitation erosion and pitting of heat rejecting aluminium surfaces (eg. behind exhaust ports) helps to increase component life. A concentration of at least 30% glycol is required to obtain a significant improvement in cavitation performance. Motor manufacturers normally use a minimum of 33% glycol coolant in new vehicles to achieve satisfactory engine cooling system protection.RXSOL REDCOOL is premixed to more glycol concentration.
RXSOL REDCOOL will raise the boiling point and lower the freezing point of the engine coolant. The benefits impart a resistance to the engine coolant boiling in summer and freezing in winter.
RXSOL REDCOOL incorporates additives to guard against corrosion of cast iron, steel, brass, solder, copper and aluminium alloys used for engine and radiator components.
Product Procedure:
Drain and flush previous fluid according to the instructions provided by the vehicle manufacturer. For best results set heater controls to “HEAT” whilst this is carried out.
To remove traces of old fluid, flush the system with clean water.Remove drain plug or bottom radiator hose as appropriate. Hoses other than the bottom radiator hose may need to be removed to ensure all the old coolant is removed..
RXSOL REDCOOL can be used as either a top-up or complete fill without the danger of diluting coolant concentrations. DO NOT ADD WATER to the cooling system when refilling, only add RXSOL REDCOOL .
RXSOL REDCOOL provides effective corrosion and freezing point protection to -210C. Start and run engine for 5 minutes to circulate the fluid. Check for leaks and top-up system with RXSOL REDCOOL if required. For maximum system protection, replace RXSOL REDCOOL at least every three years or 60,000 km
Product Technical Specification:
Typical Characteristics
pH - 7.9
Reserve Alkalinity ml - 5.8
Boiling Point (undiluted ) 0C - 120
Freezing point = - 37
Density @200C kg/L - 1.05 - 1.09
Product pack size:
20 Ltrs, 25 Ltrs, 210 Ltrs.
Product specification of Peracetic Acid for your reference are available through this
Link http://westindiachemical.com/product/coolant-premix-redcool
We also have ready stock available . We commit you the best quality, huge quantity and fast delivery time.
Please feel free to contact us on Email westindiachemicals@gmail.com
