Primary tabs

FREE SHIPPINGFree shipping on all orders over 100000 INR.

Pickling Paste Neutralizer

0
No votes yet
SKU::RXSOL-68-6803-002

Product Qty Per Unit: 
2.00
Product usage unit: 
Kg.PWD

Negotiate Price

Product Delivery Locations: 
Kandla, Gandhidham, Mundra, Sikka, Jamnagar, Surat, Navlakhi, Porbander, Pipava, Dehej, Hazira, Okha, Vadodra, Ahmedabad, Rajkot
Category: 
Metal Treatment-68
Generic Name: 
Pickling Paste Neutralizer is a specialized chemical used after the application of stainless steel pickling paste to neutralize residual acids and restore the treated metal surface to a safer, controlled condition.
Product Description: 

Pickling Paste Neutralizer – Stainless Steel Pickling Treatment

Pickling Paste Neutralizer is a specialized chemical used after the application of stainless steel pickling paste to neutralize residual acids and restore the treated metal surface to a safer, controlled condition.

Pickling paste is commonly used to remove weld discoloration, heat tint, oxides, and surface contamination from stainless-steel welds and fabricated components. After pickling, proper neutralization and rinsing are essential to remove acidic residues and help prevent continued chemical attack. 

Pickling Paste Neutraliser is a alkaline solution for the neutralisation of acidic pickling waste. It contains an in built pH indicator to provide a visual colour change when neutralisation of spent acidic waste has been completed.

Product Application: 

Key Applications

 

  • Neutralization after stainless-steel pickling

  • Treatment of stainless-steel weld areas

  • Removal/neutralization of residual pickling acid

  • Stainless-steel fabrication and maintenance

  • Pipeline and process-equipment cleaning

  • Heat exchanger and tank maintenance

  • Marine and industrial stainless-steel equipment

 

Pickling Paste Neutraliser allows users of pickling paste and other acidic metal treatment products to comply with pH requirements of trade waste water regulating authorities.

Product Procedure: 

Typical Pickling Process

A typical stainless-steel surface-treatment sequence is:

Degreasing → Pickling Paste Application → Rinsing → Neutralization → Final Rinsing → Passivation

The neutralizer is applied only according to the product manufacturer's instructions. Concentration, contact time, and application method depend on the pickling product, stainless-steel grade, surface condition, and site requirements.

 

DIRECTIONS FOR USE

1) Neutralisation of retained acidic waste For every litre of spent pickling waste, add approximately 1.7 litres of Pickling Paste Neutralizer. The Pickling Paste Neutralizer on contact with the spent acid waste will go clear. Keep on adding Pickling Paste Neutraliser solution till a faint pink coloration exist.

If neutralisation has not occurred with the initial dosage, then add additional quantities of Pickling Paste  Neutraliser at 100ml per litre of waste until colour change is observed.


2) Diagnostic Use After washing the pickling gel away and while still wet, spray thePickling Paste Neutraliser solution directly onto the area where the pickling gel was applied, in particular in corners and crevices. If residual acid is present an effervescent reaction will occur. Flush with water thoroughly once the effervescence has stopped.

Avoid contact with skin or eyes.

Product Note: 

Important Safety Note

Pickling pastes can contain strong acids and may be highly hazardous. The neutralizer should not be mixed directly with the pickling paste unless the manufacturer's instructions specifically permit it. Thorough water rinsing and appropriate PPE are normally required before neutralization.

Always consult the SDS and Technical Data Sheet (TDS) for the specific pickling paste and neutralizer being used.


Pickling Paste Neutraliser is an alkaline solution so that contact with skin and eyes is avoided. Wear eye goggles and appropriate protective clothing. If the product comes in contact with the skin immediately wash affected area thoroughly with water and soap. Seek medical attention in the event of irritation. If required remove and rinse contaminated clothing.
 

If the product comes in contact with the eyes, immediately hold the eyes open and wash with fresh running water. Ensure irrigation under the eye lids by occasionally lifting upper and lower lids. If pain persists or recurs, seek medical attention.
 

PACKAGING
Pickling Paste Neutraliser  is packed in 2 Ltrs, 5 Ltrs, 20 litres, 25 Ltrs  & 210 litres.

Product Technical Specification: 

Appearance : dark pink alkaline liquid; mixes with water
pH : 12.0 ± 0.5
Specific gravity : 1.14 - 1.16
Solubility in water : miscible

Product pack size: 
1 Kgs, 2 Kgs, 5 Kgs
Product alias: 
<br />

Pickling Paste Neutralizer, Stainless Steel Pickling Neutralizer, Pickling Neutralizer Chemical, Stainless Steel Pickling Chemical, Pickling Paste Cleaner, Stainless Steel Weld Cleaning, Weld Pickling Chemical, Stainless Steel Surface Treatment, Pickling Acid Neutralizer, Stainless Steel Passivation Preparation, Industrial Pickling Chemical, Stainless Steel Cleaning Chemical, Pickling Neutralizer Supplier, Stainless Steel Chemical Supplier.



Pickling Paste Neutralizer manufacturer supplier distributor in Mumbai, Kandla, Kolkata, Vizag, Chennai, India, Fujairah, Dubai UAE, Muscat Oman, Kenya Africa. Get the best quality of Pickling Paste Neutralizer at a competitive price from us. We have ready stock of Pickling Paste Neutralizer in India, UAE Gulf, Oman, Kenya Africa. Contact us for bulk as well as small orders.


Remarks: 

Benefits

  • Helps neutralize residual acid after pickling

  • Supports safe post-pickling treatment

  • Helps reduce continued acid attack on stainless steel

  • Facilitates thorough rinsing and surface preparation

  • Suitable for stainless-steel fabrication and maintenance operations

  • Helps prepare surfaces for passivation or subsequent treatment