Corrosion Inhibitor for Closed Open Cooling System
RXSOL-43-4028-220RXSOL-40-4028 creates an insoluble polymeric surface complex on copper and its alloys also works synergistically with other inhibitors to effectively control the corrosion of steel and aluminium in the system.
Product Description
RXSOL Triazole-Based Corrosion Inhibitor
For Closed and Open Cooling Water Systems
Brand: RXSOL
Product Category: Industrial Water Treatment Chemicals
Chemical Base: Tolyltriazole (TTA) / Benzotriazole (BTA)
Application: Cooling Towers, Chilled Water Systems, HVAC Circuits, Heat Exchangers and Industrial Cooling Water Networks
Supplementary corrosion inhibitor - open or closed cooling systems
RXSOL-40-4028 is an innovative, supplementary corrosion inhibitor developed specifically for use in open or closed cooling systems.
Application & Usage
In particular, RXSOL-40-4028 creates an insoluble polymeric surface complex on copper and its alloys, and also reacts with copper in solution. RXSOL-40-4028 also works synergistically with other inhibitors to effectively control the corrosion of steel and aluminium in the system.
Control and dosage of RXSOL-40-4028 - The dosage of RXSOL-40-4028 required varies widely with different applications.
Dosage
Recommended Dosing
These values refer to active triazole concentration in circulating water, not the amount of commercial product.
|
Application |
Indicative Active Triazole Target |
|---|---|
|
Open cooling tower – initial treatment |
10–20 ppm |
|
Open cooling tower – maintenance |
1–3 ppm |
|
Closed cooling water system |
2–10 ppm, according to metallurgy and program |
|
Aggressive water conditions |
Determine from corrosion testing |
Typical open-tower passivation and maintenance ranges are supported by published cooling-water treatment guidance. Closed-loop requirements can vary significantly, particularly with mixed metallurgy.
For a product containing 19.8% active triazole, a theoretical 5 ppm active treatment in 100,000 litres requires approximately 2.53 kg of product, excluding consumption and system losses.
Typical initial dosage for an untreated system is 8 liters of product per 1000 liters of water.
Technical Specifications
Technical Specifications
|
Parameter |
Characteristics |
|---|---|
|
Appearance |
Clear to Pale amber liquid |
|
Base Content |
Triazole |
|
pH at 25°C |
Alkaline; establish validated range |
|
Specific Gravity |
>1 |
|
Water Compatibility |
Dilutable in treatment water |
|
Foam Formation |
Low, subject to testing |
|
Shelf Life |
Establish through stability testing |
Remarks / Precautions
Key Advantages
-
Excellent corrosion inhibition for copper and copper alloys.
-
Helps minimize copper corrosion and metal-ion release.
-
Suitable for open and closed cooling water systems.
-
Compatible with many phosphate, phosphonate, molybdate and polymer-based treatment programs, subject to testing.
-
Helps protect copper tubes in condensers and heat exchangers.
-
Available as a concentrated liquid formulation.
-
Can be formulated as a nitrite-free product.
-
Suitable for integration into multi-metal corrosion inhibitor programs.
Important: Triazoles primarily protect copper and copper alloys. For carbon steel, cast iron and aluminium, additional corrosion inhibitors are generally necessary.
Procedure
Recommended Dosing
These values refer to active triazole concentration in circulating water, not the amount of commercial product.
|
Application |
Indicative Active Triazole Target |
|---|---|
|
Open cooling tower – initial treatment |
10–20 ppm |
|
Open cooling tower – maintenance |
1–3 ppm |
|
Closed cooling water system |
2–10 ppm, according to metallurgy and program |
|
Aggressive water conditions |
Determine from corrosion testing |
Typical open-tower passivation and maintenance ranges are supported by published cooling-water treatment guidance. Closed-loop requirements can vary significantly, particularly with mixed metallurgy.
For a product containing 19.8% active triazole, a theoretical 5 ppm active treatment in 100,000 litres requires approximately 2.53 kg of product, excluding consumption and system losses.
Typical initial dosage for an untreated system is 8 liters of product per 1000 liters of water.
Tag Identification
#CoolingWaterTreatment_IndiaUaeOman
#CoolingWaterTreatment_DubaiSharjahAjman
#CoolingWaterTreatment_MuscatOman
#CorroisionInhibitorCoolingSystem_DubaiMuscatMumbaiSurat
Notes
Product Description
RXSOL Triazole-Based Corrosion Inhibitor is a specialized corrosion-control treatment designed to protect copper, brass, bronze and copper-alloy components in industrial cooling water systems.
The product utilizes triazole chemistry to form a protective film on copper-containing surfaces, minimizing metal dissolution, corrosion and copper-ion release.
It can be incorporated into both open recirculating and closed-loop cooling water treatment programs.
RXSOL-40-4028-025 is water treatment chemicals and cleassified as a cooling water treatment chemicals. RXSOL-40-4028-025 principally works as corrosion inhibitors in cooling water treatment chemicals.
RXSOL-40-4028-025 most commonly used as a corrosion inhibitor for open closed cooling water systems.
Other Names
Accepta 2322, Corrosion Inhibitor for Chilling Water, PM 3601, Corrosion Inhibitor Closed and Open Cooling Water System 220 Ltr pack
Packing Sizes
Material Safety Data Sheet (MSDS)
| Product Name | RXSOL-40-4028-220 |
| Product Type | Corroision Inhibitor for closed Open cooling system |
Company Details:
RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA
Stock Point : Mumbai, Kandla, Chennai, Kolkata, Vizag, Fujairah, Muscat
| Phone | +91 22 65113333 / 5555 / 9999 / 27611360 |
| Fax | +91 22 2781 1318 ::: AOH: 0091 9821214367 |
| mail @ rxmarine.com |
| Product contains: |
CAS No |
Contents | Health (class) |
Risk(R) |
|
Sodium Hydroxide |
1310-73-2 |
5-6% |
C |
R35 |
|
Triazole |
95-14-7 |
18-21% |
Xn, N |
20-22, 36, 53 |
| Proprietory Polymer Blend | ----- | 79-81% | ----- | ---- |
Symbol(s) C
Risk Phrase(s R35, 53
This product is toxic if swallowed. Product can be irritating to eyes and skin.
Toxic to aquatic organisms and may cause long-term adverse effects in the aquatic environment.
|
General Instructions |
In all cases of doubt, or when symptoms persist, seek more advice. Remove from exposure, rest and keep warm. Seek medical attention, treat symptomatically. |
|
Skin Contact |
Clean affected area with plenty of water, remove contaminated clothing immediately. Seek medical attention. |
|
Eye Contact: |
Irrigate the eyes thoroughly with water for at least 15 minutes, holding the eyelids apart if necessary. Obtain medical attention. |
|
Ingestion |
Wash out mouth with water and give plenty of water to drink. DO NOT induce vomiting. Obtain medical attention. |
| Extinguishing Media |
Carbon dioxide, dry chemical or foam. Water spray must be ineffective |
| Unsuitable Extinguishing Media | None. |
| Exposure Hazards | n/a |
| Hazardous Combustion Products | May give off toxic fumes |
| Special equipment for fire fighting | Wear self-contained breathing apparatus |
|
Personal precautions |
Wear appropriate protective clothing (see section 8). Also apply good industrial hygiene |
|
Environmental Precautions |
Observe all relevant national regulations |
| Clean up Procedure |
Flush spillages with large quantities of water and wash to waste |
|
Handling |
Avoid contact with eyes and skin |
|
STORAGE |
In a well ventilated area away from incompatible materials |
|
Exposure Limit (8hrs) |
For sodium hydroxide 2mg/m |
|
Type |
N/A |
| Protective Measures | |
| Respiratory: | In the event where significant exposure is possible wear self contained breathing apparatus |
| Hand: | Wear suitable impervious gloves |
| Eye: | Wear chemical goggles |
| Skin: | Wear suitable overalls |
|
Appearance |
Clear to Pale amber liquid |
|
Odour |
Characteristic azole odour |
|
pH |
11 |
| Boiling Point / Boiling Range |
Not determined |
|
Melting Point/Melting Range |
N/A |
| Flash Point | none |
| Flammability | Non flammable |
| Autoflammability | N/A |
| Explosive Properties | N/A |
| Oxidising Properties | N/A |
| Vapour Pressure | N/A |
| Relative Density | 1.195 |
| Solubility in water | Miscible |
| Solubility in other solvents | Not known |
| Partition coefficient and N-octanol/water | ---------- |
| Other Data | None |
|
Stability |
Stable |
|
Conditions to Avoid |
None |
| Materials to avoid | Avoid all strong acids |
| Hazardous reactions | See Section 5 |
Irritating to the eyes and skin, inhalation may effect the respiratory tract.
Acute oral LD50 > 1000mg/kg
|
Environmental Effects |
May cause adverse effect in the aquatic environment |
| Mobility | n/a |
| Degradability | n/a |
| Bioaccumulative Potential | n/a |
| Marine Pollutant | No evidence |
| Product : |
In accordance with national waste regulations |
| Container | Wash empty container thoroughly with water before disposal |
|
LAND TRANSPORT |
|
| Item Number | 8.41 (b) |
| UN Class |
8 |
| ADR Class | 8 |
| UN Number | 3266 |
| Packaging Group | III |
| Proper Shipping Name (PSN) | Corrosive liquid, basic, inorganic NOS (contains Sodium Hydroxide UN No 3266) |
| SEA TRANSPORT | |
| UN Number | 3266 |
| Class | Not restricted |
| Packing Group | III |
| Marine Pollutant | no |
| EMS | 8.15 |
| MFAG | 760 |
| IMDG Code | 8147 |
| PSN | Same as above |
Chemic al identity: Aqueous solution of organic heterocyclic compounds
Labelling according to the chemical (Hazard Information and Packaging) Regulations 2002 CHIP 3
|
EEC Number |
N/A |
| Symbol(s) |
C- Corrosive |
| RiskPhrase(s) | |
| R35 | Causes severe burns |
| R53 | May cause adverse effect in the aquatic environment |
| Safety Phrase(s) | |
| S26 | In case of contact with eyes rinse immediately with plenty of water and seek medical advice |
| S37/39 | Wear suitable gloves and eye/face protection |
Product contains Sodium hydroxide, Triazole C - Corrosive, Xn -Harmful, N - Dangerous for the environment
| R20 |
Harmful by Inhalation |
| R22 | Harmful if swallowed |
| R35 | Causes severe burns |
| R36 | Irritating to eyes |
| R53 | May cause adverse effects in the aquatic environment |
| Further details might be available upon request | |
|
Date SDS Revised June 2026Issue 2........................... DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable. |
Supply Locations
Corroision Inhibitor for closed & Open cooling system manufacturer and supplier in Fujairah, Dubai, Sharjah, Ajman, Sharajah, UAE MIddel East, Muscat, Barka, Sohar Oman, Mumbai, Kolkata, Vizag, Chennai, Gandhidham, Surat Gujrat, Nairobi Kenya, Canada
Need pricing or a bulk quote?
Send us the product and quantity — our Gandhidham team replies with a quote the same day.