Rust Kleen 999 RX DERUSTING SOLUTION
Rust Remover is acceptable for use as an acid cleaner (A3) in
RUST Kleen 999 RX (DERUSTING SOLUTION) is a Liquid Acid, Surfactant, and Corrosion Inhibitor based product primarily designed to simultaneously clean and remove rust from steel and iron parts. This product is also effective in removing flux, heat scale and other oxides from steel, stainless steel, cast iron and aluminium in immersion and hand-wipe cleaning applications.
RUST Kleen 999 RX (DERUSTING SOLUTION) is also suitable for preparing steel and aluminium surfaces for painting in immersion (Vat) or hand-wipe applications. Use of Rust Kleen 999 RX (DERUSTING SOLUTION) for cleaning, rust removal or pre-paint preparation must be followed with a fresh water rinse and drying. If used prior to painting, parts should be painted after the drying step.
For parts cleaning, rust removal and surface preparation prior to painting in automotive and industrial applications.
Customer Owned Machines Immersion (other common terms - Vats, Dip Tanks, Hot Tanks).
Note: Tanks (Vats) should be made of stainless steel (304, 316, or 347), ceramics or other acid proof materials. Heating elements should be made of stainless steel, impervious carbon or graphite. Do not use Monel equipment, lead or rubber lining in tanks.
Light to moderate grease and oil. Light to heavy rust, heat scale, flux, and other oxides.
Immersion: Use 5% to 25% volume with water at room temperature to 160ºF. Follow the cleaning step with fresh water rinsing and drying. The higher the concentration and heat, the faster the rust removal. Immersion time depends on the degree of soil and amount of rust to be removed. Hand Wipe: Use 10% to 50%/volume added to water at room temperature to 120ºF. Apply with clean rags, wipes or brushes. Allow the Rust Remover to soak on part surfaces for several minutes before wiping or brushing for improved results. Follow with fresh water rinsing then dry the parts.
*Note: Use acid resistant gloves and safety glasses when handling this product. Refer to the
product MSDS for complete safety instructions.
Titration Procedure (insert “Information”)
- Using a pipette, take a 5 ml sample of Rust Remover from the cleaning bath
- Put the 5 ml sample into the mixing flask
- Add 10 ml of water then stir well to mix
- Add 5 drops of phenolphthalein indicator
- Counting the drops added, add 10N Sodium Hydroxide one drop at a time until the solution turns from clear to purple. Swirl between drops. The number of drops needed is the concentration of the Rust Remover.
Not intended for spray use.
Do not use or mix with chlorine containing cleaners or solutions as chlorine gas can be released.
Will gradually attack steel tanks, heating elements and piping
This product is highly acidic. The product concentrate causes burns of the eyes and may cause burns of the skin.
|Single-step process||: Does not need separate cleaning step prior to rust removal|
|Versatile||: Effective on a variety of metals and soils|
|Effective||: Quickly removes rust and other oxides from metal surfaces.|
|Flexible||: Use Can be used in immersion and hand-wipe applications.|
|No VOC||: No VOC permits required|
|Mild Odor||: Minimal irritation to operators and other employees|
Keep away from sparks or flame. Do not breathe dust or vapors. allowed out of the workplace. Wear protective gloves/protective clothing/eye protection/face protection.Wash thoroughly after handling. Acid reacts with water and can splatter acid onto personnel. When diluting, cautiously mix product and water together while stirring
Store containers in a cool, dry place. Do not pressurize, cut, weld, braze, solder, drill, or grind containers. Keep containers away from heat, flame, sparks, static electricity, or other sources of ignition.
|Odor Threshold||No Information Available|
|pH Concentrate||< 1|
|Specfic Gravity||1.38 - 1.43 at 25ºC|
Our Other valuable marine ship maintenance products, which is most commonly purchased by ship chandlers of Gandhidham - Kandla. We are keeping ready stock at GANDHIDHAM - Meghapar ware house, to full fill demand of mundra - sikka - Jamnagar port of Gujarat.
OXYGEN CONTROL 25L
CONDENSATE CONTROL 25L
ROCOR NB 25L
NATURAL HAND CLEANER 5L
ALKALINITY CONTROL 25L
METAL BRITE 25 LTR
ENVIROCLEAN 25 LTR-CLEANING AND MAINTENANCE
Mail us : email@example.com
Other valuable ship MAINTENANCE CHEMICAL PRODUCTS supplier in Kandla, Mundra, Sikka, Navlakhi Gujrat Port.
Air Cooler Cleaner
Descaling Liquid For Silica
Alkleen Safety Liquid
Rust Kleen 999 RX DERUSTING SOLUTION manufacturer and supplier in Mumbai, Kolkata, Chennai, Visakhapatnam, Gandhidham, Surat, Manglore, Fujairah, Dubia, Mussafah Abu dhabi, Sharjah.